|
|
|
| V2I-1
Port Gateway Grandstream
HandyTone ATA-286 is an award-winning
next generation VoIP analog telephone
adaptor based on industry open standards.
Built upon innovative technology,
Grandstream HandyTone ATA-286 features
market leading superb audio quality,
compact size, and rich functionalities
at highly-affordable price. For more
details mailto sales@voip2india.com
|
|
|
Compact Size
NAT traversal using IETF STUN/RTP
Superb hi-fidelity auto quality
Support popular codecs
Support DIGEST authentication and encryption
Support Layer 2/Layer 3 QoS
Full Feature Voice/Fax-over-IP
|
| For ATA 286 Configuration
Visit :- How to configure your 1 Port Gateway |
Key
Features
- Support SIP 2.0, TCP/UDP/IP, RTP/RTCP,
HTTP, ARP/RARP, ICMP, DNS, DHCP, NTP,
TFTP protocols
- Support NAT traversal using IETF STUN
and symmetric RTP (compatible with Cisco’s
ATA-186, etc)
- Advanced Digital Signal Processing (DSP)
to ensure superb hi-fidelity audio quality
- Provides 1 LAN port and 1 FXS interface
for any analog telephones, cordless phones,
and fax machines
- Support transparent Fax pass-through
and in the future T.38 (pending)
- Interoperable with various 3 rd party
SIP end user device, Proxy/Registrar/Server,
and gateway products
- Advanced and patent pending adaptive
jitter buffer control, packet delay and
loss concealment technology
- Support popular codecs including G.723.1
(5.3K/6.3K), G.729A/B, G.711 (a-law and
u-law), G.726, and G.728. Dynamic negotiation
of codec and voice payload length
- Support standard voice features such
as Caller ID Display or Block, FLASH,
in-band and out-of-band DTMF (RFC2833),
Dial Plans, off-hook auto dial, early
dial, click-to-dial
- Support acoustic echo cancellation,
voice mail with indicator, downloadable
ring tone (pending)
- Support Silence Suppression, VAD (Voice
Activity Detection), CNG (Comfort Noise
Generation), Line Echo Cancellation (G.168),
and AGC (Automatic Gain Control)
- Support DIGEST authentication and encryption
using MD5 and MD5-sess.
- Provide easy configuration thru manual
operation (attached analog phone keypad
and voice prompt, Web interface) or personalized
automated provisioning via central configuration
file for mass deployment.
- Support for Layer 2 (802.1Q VLAN, 802.1p)
and Layer 3 QoS (ToS, DiffServ, MPLS)
- NAT-friendly remote software upgrade
capability (via tftp) even from behind
firewalls/NATs.
- Support for fail-over SIP server and
DNS server (pending)
|
| For ATA 286 Configuration Visit :- How to configure your 1 Port Gateway |